Infinite Menus, Copyright 2006, OpenCube Inc. All Rights Reserved.

Welcome Guest ( Log In | Register )

Personal Photo
Personal Statement
maudio doesn't have a personal statement currently.
Personal Info
Age Unknown
Gender Not Set
Location Unknown
Birthday Unknown
No Information
Joined: 7-October 17
Profile Views: 5*
Last Seen: 8th October 2017 - 01:19 AM
Local Time: Oct 22 2017, 06:39 AM
2 posts (0.14 per day)
Contact Information
AIM No Information
Yahoo No Information
ICQ No Information
MSN No Information
Contact Private
* Profile views updated each hour




My Content
8 Oct 2017
The 3.5mm headphone jack was removed from the last iPhone 7. Last year many consumers have complained that there is very inconvenient without audio jack. Unfortunately, the new iPhone 8 will have no jack either.
As for myself, I always listen to music on the way to office or back home, I canít stand a phone without jack. As all we know, the wireless Bluetooth technology is not mature. The audio quality of Bluetooth headset wireless is less good than the wired one. Bluetooth one has to be recharging too. If you listen music with wireless headset often, you might have to charge it every day. What if I forget to recharge it? Then you might not listen music with your phone. Please stop trying to kill the headphone jack. Itís a very useful feature for phone.
Unfortunately, Appleís new iPhone, which will be release tomorrow, still has no jack. More and more smartphone has removed the audio jack. Maybe we will be force to use wireless Bluetooth headphones in the future. Qualcomm keeps developing Bluetooth technology, like aptX low latency, aptX HD. Headphones with aptX low latency enhance the experience of watching TV and playing mobile game with Bluetooth headset. It reduces the audio delay. Mixcder MS 301 high end headphones is equipped with aptX low latency technology. With fashion design and high audio quality, MS301 has received many good customer feedbacks. The Bluetooth headphone with aptX HD means it has high audio quality. If the two aptX technology can be combined in the same headphone, that would be great.
Headphones with jack or no jack, which one do you prefer?
8 Oct 2017
If the specification level of a headset is an important factor that enables you to buy the headphones. This article would state the professional explanation of sensitivity. Get start to learn now.

Sensitivity is the efficiency with which an in ear headphone driver uses the power it receives to convert an electrical signal into an acoustical signal, resulting in clear sound without any distortion. Itís related to the impedance and it must be compatible with it for you to enjoy the ultimate audio experience.

Sensitivity could be measured by decibel (dB) of Sound Pressure Level per milliwatt. In some cases it might be seen as dB/mW or (dB SPL/mW).

Measured in decibels of sound pressure levels, it indicates the magnitude of loudness which can be achieved at a certain level of power from the source, usually 1 mili watt. Headphones usually have sensitivity ranging within 90-110db/mW so as to avoid volume decibel levels where music listening might become very painful.

An earphone's sensitivity is 122 dB SPL/mW. This means 1 mW of power will generate 122 dB SPL. This SPL level is over the threshold of pain and can cause permanent hearing damage in a short amount of time. Figure #2 shows different levels in dB SPL and the exposure time before hearing damage may occur. A typical headphone output could provide this level. Note that dB SPL do not sum in a linear manner,2 mW into the earphone will not generate 244 dB SPL. Doubling or halving the input power increases or decreases the SPL by 3 dB. A .5 mW input into the earphone will generate 119 dB SPL. A sensitivity rating doesnít mean much until it is matched with the output capabilities of an audio system. If a system has low output level, using a low sensitivity earphone will result in low SPL. Increasing the amplifier level in this configuration will lead to distorted audio due to amplifier clipping. On the other hand, a high sensitivity earphone coupled with a high power headphone amplifier will force a low volume setting, and then can result in more noise. A classic case of this problem is connecting a pair of efficient earphones to an airplane sound system. Setting the volume at the first position, right above zero, gives enough level but is noisy. Increasing the volume makes it too loud to use. A simple, passive headphone attenuator solves this problem by reducing the level being delivered to the headphones, allowing you to raise the volume of the headphone amplifier to a setting that produces less noise. The following table shows the SPL output level for the different earphones at different source levels. Mixcder new HD601 NFC Bluetooth headphone, the sensitivity of the speakers is 96Ī3dB, which is a normal level within 90-110db/mW.

Higher sensitivity guarantees better driver performance without using a lot of power; however it also means there are chances of distortion at higher volumes (which might cause damage to the earphone and your ears). On the other hand, lower sensitivity earphones require more power and are a more durable option as compared to higher sensitivity ones as they don't damage the driver unit despite the amount of power they require. Hence, lower sensitivity over ear headphones should be paired with high power supplying devices to get good output sound quality.
Last Visitors
maudio has no visitors to display.

Other users have left no comments for maudio.

There are no friends to display.
RSS Lo-Fi Version Time is now: 22nd October 2017 - 05:39 AM