Infinite Menus, Copyright 2006, OpenCube Inc. All Rights Reserved.

Welcome Guest ( Log In | Register )

Reply to this topicStart new topic
> Cnsuperpower Log Splitter The Lifespan And Safety Of The Machine, Cnsuperpower Log Splitter the lifespan and safety of the machine
post Mar 1 2017, 12:00 AM
Post #1


Group: Members
Posts: 3
Joined: 28-February 17
Member No.: 117,197

Breaking logs and wood up by hand can be painful, time-consuming, and dangerous. And, while electric log splitters are highly effective, they are also expensive. Instead, you can build a manual wood splitter at home with simple parts for less money than even a used splitter.

Warning: As with any machinery, it is essential that you take proper precautions when building and operating your manual log splitter to avoid injury. Be familiar with how to use your splitter and wear protective equipment. Always keep hands, feet, and other body parts away from the blade system. Thoroughly clean your splitter after each use, and regularly sharpen the blades to increase the lifespan and safety of the machine.

Step 1 Weld the Blades Together

Weld the four blades together in a cross shape. Be sure to wear proper safety attire for this step, and complete it in a well-ventilated area. To weld the blades, you may find it helpful to cut off the inner corners of them. Start by welding two blades together at a 90-degree angle. Repeat this step for the other two blades, and then weld the two pairs of blades together.

Step 2 Weld the Blades Into the Pipe

Cut about 20 inches of steel pipe, and cut notches on one end to match up with the four blades. Weld the blades into the pipe, reinforcing a tack-weld with a stronger weld or filler bar for reinforcement.

Step 3 Set up Your Hydraulic Pump

Home-improvement centers carry basic hydraulic-pump systems. A working pressure of about 1,500 pounds per square inch should be adequate for the average log splitter. Set up the hydraulic pump according to any instructions given by the manufacturer.

Step 4 Attach the Blade System to the Pump

Fit the blade system to the completed hydraulic pump. Ensure that the pump is deactivated while setting up the blades. Once the blade system is attached, test the log splitter with a piece of practice wood and make any adjustments to the blades or pump as necessary.

Warning: Be sure your system is deactivated while setting up the blade. Not turning it off while completing this step could result in injury.

If you have any questions or concerns about your log splitter, consult with a home-improvement specialist for further advice.

CNSuperpower Log Splitters provides a full range of log splitters from home, cottage and industrial use.

Contact us

Add:No.391 Huimin road,

Huimin town,Jiashan county,Zhejiang,P.R.China

Tel: +86-(0)573-84647355




Go to the top of the page
+Quote Post

Reply to this topicStart new topic


RSS Lo-Fi Version Time is now: 16th January 2018 - 01:05 PM
IPS Driver Error

IPS Driver Error

There appears to be an error with the database.
You can try to refresh the page by clicking here